ποΈ NT at a glance
Regulator: NT WorkSafe
Who issues the card: NT WorkSafe issues the NT White Card. You apply through a Territory Business Centre after your training.
Safety law: Work Health and Safety (National Uniform Legislation) Act 2011 (NT) and its Regulations
Unit of competency: CPCWHS1001 Prepare to work safely in the construction industry (supersedes CPCCWHS1001)
Capital: Darwin
Online delivery: Live virtual classes only, with approved RTOs
From 1 July 2026, NT WorkSafe approves connected real-time delivery, which is live training over video platforms such as Zoom or Teams with real-time interaction between trainer and learner. Self-paced online e-learning is not connected real-time delivery. Choose an RTO that NT WorkSafe lists as approved for this method. Otherwise, training is face-to-face with an approved NT RTO.
How the White Card works in Northern Territory
Construction workers in the NT must complete general construction induction training with an RTO approved by NT WorkSafe. To be approved, an RTO must have CPCWHS1001 on its scope of registration and apply to NT WorkSafe.
After you pass, apply to a Territory Business Centre for a Northern Territory General Construction Induction Training Card within 60 days, using the application form. You can lodge it in person, by email, by post or online. When applying for a new or replacement card you can also ask for a digital White Card, available since 1 June 2022. It can be stored in Apple Wallet or Google Pay and checked with a QR code. NT WorkSafe still recommends carrying the physical card, because digital cards may not be verifiable where phones are banned or there is no internet.
Each RTO sets its own course fee. NT WorkSafe publishes its licensing fees and charges separately.
White Card Requirements in Northern Territory
Complete general construction induction training (CPCWHS1001) with an RTO approved by NT WorkSafe
Training must be face-to-face, or connected real-time delivery (live video) from 1 July 2026 with an RTO approved for that method. Self-paced online courses do not qualify
Apply to a Territory Business Centre within 60 days of completing the training, in person, by email, by post or online
Have a Unique Student Identifier (USI), which is needed for all nationally recognised training
Keep your NT White Card available for inspection while doing construction work
What NT WorkSafe does
NT WorkSafe administers the Work Health and Safety (National Uniform Legislation) Act 2011 in the Northern Territory. For White Cards, it approves RTOs to deliver general construction induction training, lists the providers approved for connected real-time delivery, and issues physical and digital White Cards.
The 2-year rule in NT
NT WorkSafe says existing White Card holders do not need to retrain when training packages are updated. However, you may need to complete the training again if you have not done construction work in the past 2 years, as set out in the model WHS Regulations.
A White Card is general induction only. Every site still needs its own site-specific induction, and some tasks need a separate high risk work licence.
Replacing a lost or damaged card
Apply for a replacement card using NT WorkSafe's application process. You can request a digital White Card at the same time.
How to Get Your White Card in NT
Step 1: Prepare
Study for the assessment using our free practice test with 505+ questions. Focus on WHS legislation, hazard identification, safety signs, PPE and emergency procedures. Our study guide and glossary cover the key terms.
Step 2: Enrol with an RTO
Choose a registered training organisation (RTO) that can deliver CPCWHS1001 in NT. Training is face-to-face, or a live virtual class with an RTO approved for that method in NT. Course prices are set by each RTO, so compare a few before you book.
Step 3: Complete Training
Attend the course and pass the assessment. Have your Unique Student Identifier (USI) ready and bring the identity documents your RTO asks for. Under the national unit, assessment must use a range of methods, including practical demonstration and oral and written reporting.
Step 4: Receive Your Card
Who issues it: NT WorkSafe issues the NT White Card. You apply through a Territory Business Centre after your training. Keep your statement of attainment (or statement of training) safe, as you may need it on site while you wait and to replace a lost card later.
What the course covers and what to expect
The content is set by the national unit CPCWHS1001, so it is the same in every state. According to the unit's published knowledge evidence, you need to show you understand:
- Basic duty of care, and the roles, rights and responsibilities of businesses and workers under the WHS (or OHS) law that applies where you are
- The meaning of "hazard" and "risk", and the five risk management steps in order: identify the hazard, assess the risk, consult and report, control the hazard, review
- Common construction hazards, including asbestos, confined spaces, electricity and power lines, excavations and underground services, dust, falling objects, hazardous substances, heat and cold, manual handling, noise, plant and mobile plant, unplanned collapse, UV radiation, and working at heights including scaffolding
- Construction safety signs and tags: emergency information, fire, hazard (danger and warning), regulatory (prohibition, mandatory, limitation) signs, and danger and out-of-service tags
- The purpose of job safety analyses (JSAs), safe work method statements (SWMS) and safety data sheets (SDS)
- The roles of first aid officers, health and safety representatives, WHS committee members and supervisors
- Responding to incidents and emergencies, accessing first aid, and the types and uses of fire blankets, fire extinguishers (water, CO2, powder, foam), hose reels and mains
On the day, expect to identify and orally report two construction hazards and explain how to control them. You will also explain the meaning of safety signs and correctly fit eye protection, hearing protection, a hard hat and a high-visibility vest, shirt or jacket. The assessor must watch these tasks in person or through live audio and video. Practise with our flashcards and WHS legislation questions.
Prepare for Your NT White Card
Practice with 505+ realistic questions covering all 12 topics. Free, no sign-up required.
Start Free Practice TestNorthern Territory White Card FAQ
How do I get a White Card in the Northern Territory?
Complete CPCWHS1001 with an NT WorkSafe-approved RTO, then apply to a Territory Business Centre within 60 days of finishing the training. You can apply in person, by email, by post or online.
Can I do the NT White Card online?
Only as a live video class. From 1 July 2026, NT WorkSafe approves connected real-time delivery, live training with a trainer over video, with RTOs listed as approved for that method. Self-paced online e-learning does not qualify.
Is there a digital White Card in the NT?
Yes. Digital White Cards were introduced on 1 June 2022. You can request one when applying for a new or replacement card. NT WorkSafe still recommends carrying your physical card.
How much does a White Card cost in the NT?
Each RTO sets its own course fee. Check NT WorkSafe's licensing fees and charges for any card fees.
Is my interstate White Card valid in the NT?
Yes. The NT uses the model WHS laws, which recognise general construction induction training cards issued in other jurisdictions.
White Card in Other States
Compare every jurisdiction side by side in our White Card requirements by state guide.
Sources and further reading (last reviewed November 2026)
WHS rules differ between states and change over time. Where this page states a legal or regulatory fact, it is based on the official sources below. If anything here disagrees with them, the official source wins. You can read how we check and correct our content.